Tag archives for Heater
An automatic temperature control system has the ability to monitor and control the temperature of a specified space without human intervention. This project uses a PIC microcontroller to automatically control the temperature of an area. This area could be a small plant, a house or any place or device that require a controlled temperature like an incubator (egg) for example. The desired temperature setting is entered using a keypad and stored in microcontroller EEPROM even if the there is a power off or system reset, this reference value will always be saved. The temperature of the area is measured using an analog temperature sensor. The microcontroller reads the temperature continuously and compares it with the desired value. If the desired value is higher than the measured value, then the heater is turned ON, if on the other hand the measured value is higher than the desired value, then the fan is switched ON. An LCD display shows the measured temperature continuously. The project code is built using Flowcode.