Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Tag archives for BTech final year projects

Automatic Temperature Control System using PIC Microcontroller – MikroC

image-66
An automatic temperature control system has the ability to monitor and control the temperature of a specified space without human intervention. This project uses a PIC microcontroller to automatically control the temperature of an area. This area could be a small plant, a house or any place or device that require a controlled temperature like an incubator (egg) for example. The desired temperature setting is entered using a keypad. The temperature of the area is measured using an analog temperature sensor. The microcontroller reads the temperature continuously and compares it with the desired value. If the desired value is higher than the measured value, then the heater is turned ON to heat the area. If on the other hand the measured value is higher than the desired value, then the fan is switched ON to cool off the area until the required temperature is reached. If the temperature reaches a certain critical value 40⁰C or higher, the buzzer will sound continuously and an LED will blink until the temperature deceases below 40⁰C. An LCD display shows the measured temperature continuously. This project can be used as a base for Final Year Project For Engineering Students

Home Security System with PIC Microcontroller and SMS Notification – MikroC

image-127
In this project, when a motion sensor (PIR) detects a movement of an intruder, an SMS will be sent to a predefined number which could be you or your security reaction company and if it is not disarmed within 30 seconds, a relay will be triggered to switch ON the siren or any other sound device. When the device is turned on, it needs to be armed by pressing the push button then it will give you one minute to allow you to safely exit your home or sleep without triggering the alarm. After that, the program enters the alarm mode, the program will constantly monitors the input from the PIR. When motion is detected, the device will send an SMS message to a predefined phone number stating: "Alarm!! Intruder Detected in your House!!! Siren will be activated in few seconds.". This project can be used as a base for Final Year Project For Engineering Students