Forums MPLAB XC8 Project Discussions Control Pic GUI Project

This topic contains 0 replies, has 1 voice, and was last updated by  gtboy 11 months, 2 weeks ago.

  • Author
    Posts
  • #672

    gtboy
    Participant

    I need some help getting the Interface project working with pic and serial port. I followed the project and once I have the C# program running and connected to COM3, nothing happends on the proteus simulation.

    I tested the serial port with a montor program and can see 1 for red led, 2 for yellow and 3 for green. So at this point I know the C# program is good and the data is passing to the serial port. The issue is with the Proteus is not capturing the data fromt the serial port.

    If any one can assist with this I really appriciate your time.

    Thanks

    Al

You must be logged in to reply to this topic.