Archives for MPLAB XC8 - Page 4

MPLAB® Code Configurator

image-93
The MPLAB® Code Configurator (MCC) is a user friendly Graphical User Interface (GUI) plug-in tool for MPLAB® X IDE which generates easy to understand C code that is inserted into an MPLAB® X project, based on the settings peripherals configurations and selections made in the Graphical User Interface (GUI). The generated code can be used in any application program. When starting out with a new project using Microchip 8-bit microcontrollers, setup of the configuration and all the peripherals can be time consuming, especially for new projects. The MPLAB® Code Configurator simplifies this down to a series of simple graphical selections from the menus within the MCC.

Interfacing ENC28J60 Ethernet Controller with PIC Microcontroller – XC8

image-793
Ethernet is the leading wired standard for networking as it enables to connect a very large number of computers, microcontrollers and other computer-based equipment to one another. With just a network switch, many different devices can easily communicate with one another with Ethernet, allowing different devices and equipment to be accessed remotely and this also provides a cost-effective and reliable means of remote control and monitoring. For microcontrollers which don't have an integrated Ethernet peripheral, Microchip offers a serial Ethernet chip that can easily be used by any microcontroller with an SPI interface to provide Ethernet capability to the application. The ENC28J60 is a popular 28-pin serial Ethernet chip, 10BASE-T stand alone Ethernet Controller with SPI interface, on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. In this article we will learn how to use the ENC28J60 Ethernet controller with Microchip TCP/IP Lite Stack and MPLAB Code Configurator.

Getting Started with ESP8266 WiFi Transceiver

image-955
The ESP8266 is a wonder WiFi module that can literally give any microcontroller access to WiFi network and thus enabling countless Internet of Things (IoT) and Home Automation applications at a fraction of cost compared to the alternative options. It's easy to use, it's popular, it has stormed the world of makers in recent years since 2014, you can now build your own cool electronic application that communicates to the internet and can be accessed from anywhere in the world

Interfacing The TC74 I2C Digital Thermal Sensor with PIC Microcontroller – XC8

image-1041
TC74 is an I2C Digital Temperature sensor form Microchip. TC74 is a serially accessible digital temperature sensor particularly suited for low cost and small form-factor applications. Temperature data is converted from the on-board thermal sensing element and made available as an 8-bit digital word. In this tutorial we are going to learn how to use MPLAB Code Configurator to read temperature from the TC74 temperature sensor and display it on an LCD