Archives for Internet of Things

Ethernet Communication with PIC Microcontroller

Posted by Bitahwa Bindu on Sunday, 20 July 2014 in Flowcode for PIC, Internet of Things, MikroC Pro for PIC, MPLAB XC8, Tutorials tags: Ethernet, Flowcode, Microcontroller, mikroC, MPLAB X, PIC Communication No Comment 3332 Reads

In this series of PIC Microcontroller Communication, after learning on how PIC Microcontroller Communication with I2C, SPI, RS232 and USB can be achieved, in this article we are going to discuss the concepts of Ethernet Communication with PIC Microcontroller. When it comes to communication involving wires, Ethernet is the leading wired standard for networking as it enables to connect a very large number of computers, microcontrollers and other computer-based equipment to each other. With just a switch, many different devices can easily communicate with one another with Ethernet, allowing devices and equipment to be accessed remotely and provides a cost-effective and reliable means of monitoring or controlling such equipment, for example a person could monitor several vending machines located in different places which can be several kilometers apart from the PC at the conform of your desk. A simple online interface to the vending machines can allow you to monitor everything from the internet.

Getting Started with ENC28J60 Ethernet Controller with Microcontrollers

Posted by Bitahwa Bindu on Friday, 25 July 2014 in Flowcode for PIC, Internet of Things, MikroC Pro for PIC, MPLAB XC8, Tutorials tags: ENC28J60, Ethernet, Flowcode, Flowcode v6, Interfacing, IoT, Microcontroller, mikroC, MPLAB XC8, PIC, PIC Communication, Tutorials No Comment 3695 Reads

Ethernet is the leading wired standard for networking as it enables to connect a very large number of computers, microcontrollers and other computer-based equipment to one another. With just a network switch, many different devices can easily communicate with one another with Ethernet, allowing different devices and equipment to be accessed remotely and this also provides a cost-effective and reliable means of remote control and monitoring, home automation, Internet of Things applications and many more. If you are using a microcontroller which does not have an integrated Ethernet peripheral, Microchip offers a serial Ethernet chip that can easily be used by any microcontroller with an SPI interface to provide Ethernet capability to the application. many compilers offer peripheral libraries to get you started in minutes.

Interfacing ENC28J60 Ethernet Controller with PIC Microcontroller – MikroC

Posted by Bitahwa Bindu on Monday, 04 August 2014 in Internet of Things, MikroC Pro for PIC, Tutorials tags: ENC28J60, Ethernet, Interfacing, IoT, Microcontroller, mikroC, PIC, PIC Communication, PIC16F, PIC18F, TCP IP, Tutorials, UDP No Comment 3232 Reads

Ethernet is the leading wired standard for networking as it enables to connect a very large number of computers, microcontrollers and other computer-based equipment to one another. With just a network switch, many different devices can easily communicate with one another with Ethernet, allowing different devices and equipment to be accessed remotely and this also provides a cost-effective and reliable means of remote control and monitoring. For microcontrollers which don't have an integrated Ethernet peripheral, Microchip offers a serial Ethernet chip that can easily be used by any microcontroller with an SPI interface to provide Ethernet capability to the application. The ENC28J60 is a popular 28-pin serial Ethernet chip, 10BASE-T stand alone Ethernet Controller with SPI interface, on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. In this article we will learn how to use the ENC28J60 Ethernet controller with MikroC Pro for PIC SPI Ethernet ENC28J60 Library.

Getting Started with Arduino

Posted by Bitahwa Bindu on Friday, 18 December 2015 in Arduino, Internet of Things, Tutorials tags: Arduino, Arduino Boards, Arduino Ethernet Shield, Arduino GSM Shield, Arduino Mega 2560, Arduino Motor Shield, Arduino Shields, Arduino Uno, Arduino Yún, Blink LED, IoT, LED, Tutorials No Comment 3257 Reads

Arduino is the open source electronics prototyping platform. It has become popular in the world of hobbyists, students, artists, programmers and professionals. Arduino was born as an easy tool for fast prototyping, aimed at students without a background in electronics and programming. All Arduino boards are completely open-source, empowering users to build them independently and eventually adapt them to their particular needs. The software, too, is open-source, and it is growing through the contributions of users worldwide.

Getting Started with Raspberry Pi

Posted by Bitahwa Bindu on Monday, 07 March 2016 in Internet of Things, Raspberry Pi, Tutorials tags: Home Automation, IoT, Raspberry Pi, Tutorials No Comment 1758 Reads

Raspberry Pi is a small credit card sized computer, It is very cheap compared to the traditional computers, the Raspberry Pi Foundation has arrangements with a few manufacturers from whom you can buy a Pi directly at $25 - $35. The Raspberry Pi unlike the traditional computer, it has the ability to integrate with electronics projects. Raspberry Pi to control devices that a microcontroller can control like LEDs, relays, LCDs etc. A Raspberry Pi is better used where more processing power and connectivity is needed like for exemple when you want to remotely access a temperature sensor via the web to change its settings and download temperature log files and more in general Internet of Things (IoT) and Home Automation applications you should consider using the Raspberry Pi.

Getting Started with ESP8266 WiFi Transceiver

Posted by Bitahwa Bindu on Monday, 29 October 2018 in Arduino, Flowcode for Arduino, Flowcode for PIC, Internet of Things, MikroC Pro for PIC, MPLAB XC8, Tutorials tags: Arduino, ESP8266, Flowcode, Flowcode for Arduino, Flowcode for PIC, Flowcode v8, Home Automation, Interfacing ESP8266 with PIC, Internet of Things, IoT, Microcontroller, mikroC, MPLAB X, PIC, Programming ESP8266 with Arduino, WiFi, WiFi Transceiver, XC8 No Comment 1254 Reads

The ESP8266 is a wonder WiFi module that can literally give any microcontroller access to WiFi network and thus enabling countless Internet of Things (IoT) and Home Automation applications at a fraction of cost compared to the alternative options. It's easy to use, it's popular, it has stormed the world of makers in recent years since 2014, you can now build your own cool electronic application that communicates to the internet and can be accessed from anywhere in the world