Archives for Internet of Things Projects
In any electronic product or project there is always a need for a source of power for the system to work. This is called a power supply. To get power hassle-free to the power lines of a breadboard can be a challenge, you will need a convenient and safe way to get either a regulated 5V DC or 3.3V DC depending on your application on your breadboard power rails. In this project we are going to design step by step a simple Breadboard power supply that takes power from a 6 to 15V DC power supply and outputs a selectable 5V or 3.3V regulated voltage using a switch. This board can be easily inserted into a breadboard using a .1" (0.254 cm) headers mounted on the bottom of the PCB. Pins labeled VCC and GND plug directly into the power lines of a breadboard.
Ethernet is the leading wired standard for networking as it enables to connect a very large number of computers, microcontrollers and other computer-based equipment to one another. In this project we are going to learn how to control any device like an LED, a relay, a light bulb, a motor and so on connected to a PIC Microcontroller from a remote location using just a web browser. An operator can use a computer, tablet or even a cellphone to control a device at a remote location. With the help of a router connected to the internet, this device can be controlled anywhere from the world in real time. Connecting to a Microcontroller using a web browser is the easiest and reliable method of establishing connectivity and above all there is no need to develop a special Graphical User Interface software on the PC or cellphone for that matter as all PCs' operating systems already have a built-in web browser or one can download one of the free other web browsers like Google chrome or Mozilla Firefox for example.